Unavailable
Nominal voltage 220
240 V
Power factor λ 0.95
Input voltage AC 198
264 V
Mains frequency 50
60 Hz
Nominal output voltage 27
54 V
Inrush current 53 A
Max. no. of ECGs on circuit breaker 10 A 17
Galvanic isolation primary/secondary 3.75 kV
Max. no. of ECGs on circuit breaker 16 A 28
Surge capability (L-N) 1 kV
Surge capability (L/N-Ground) 2 kV
Width 30.0 mm
▼ see full specification ▼
Electrical data
Nominal voltage
220
240 V
Power factor λ
0.95
Input voltage AC
198
264 V
Mains frequency
50
60 Hz
Nominal output voltage
27
54 V
Inrush current
53 A
Max. no. of ECGs on circuit breaker 10 A
17
Galvanic isolation primary/secondary
3.75 kV
Max. no. of ECGs on circuit breaker 16 A
28
Surge capability (L-N)
1 kV
Surge capability (L/N-Ground)
2 kV
Dimensions & weight
Width
30.0 mm
Height
21.0 mm
Cable cross-section, input side
0.5
1.5 mm²
Cable cross-section, output side
0.5
1.5 mm²
Wire preparation length, input side
8.5
9.5 mm
Lifespan
ECG lifetime
50000 h
Additional product data
Encapsulated
No
Capabilities
Dimmable
No
Suitable for fixtures with prot. class
I
Overheating protection
Automatic reversible
Max. cable length to lamp/LED module
2.0 m
No-load proof
Yes
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
NTC input
No
Certificates & standards
Approval marks approval
ENEC 10 / VDE / EMC / EL / CE
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Type of protection
IP20
Temperatures
Maximum temperature at tc test point
75 °C
Temperature range at storage
-25
85 °C
Max.housing temperature in case of fault
110 °C
Product benefits
Versatile scope of application due to output power range of up to 80 W
Safety requirement due to overload, overtemperature, Hot Plug protection
High efficiency and reliability
Higher quality of light thanks to low output ripple current
Areas of application
Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Suitable for use in luminaires with flexible current setting (Tri-Tap)
Suitable for indoor SELV equivalent installations
Suitable for luminaires of protection class I
Product features
Supply voltage: 220…240 V
Line frequency: 0 Hz | 50 Hz | 60 Hz
Line voltage: 198…264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
Recommended also
Rated 5.0 /5
based on 1 customer reviews
40,18
€
Rated 5.0 /5
based on 1 customer reviews
102,74
€
Rated 5.0 /5
based on 1 customer reviews
50,91
€
Rated 5.0 /5
based on 1 customer reviews
36,45
€
Rated 5.0 /5
based on 1 customer reviews
13,12
€
Rated 5.0 /5
based on 1 customer reviews
78,25
€
Rated 5.0 /5
based on 1 customer reviews
1 741,40
€
Rated 5.0 /5
based on 1 customer reviews
from 59,17
€
Rated 5.0 /5
based on 1 customer reviews
31,40
€
Rated 5.0 /5
based on 1 customer reviews
45,89
€
Rated 5.0 /5
based on 1 customer reviews
62,80
€
OPTOTRONIC FIT
Rated 5.0 /5
based on 1 customer reviews
https://www.electrico24.eu/uploads/assortment_images/a-16166-113671.jpg
LED Strips and Profiles / LED Drivers
Osram https://www.electrico24.eu/uploads/producer_logos/d83bdb510944b8ad8743f3d191f9d801.png
OPTOTRONIC FIT
89.10 PLN
available
Recommended
Rated 5.0 /5
based on 1 customer reviews
from 48,16
€
Rated 5.0 /5
based on 1 customer reviews
6,45
€
Rated 5.0 /5
based on 1 customer reviews
192,05
€
Rated 5.0 /5
based on 1 customer reviews
11,03
€
Rated 5.0 /5
based on 1 customer reviews
from 103,64
€
Rated 5.0 /5
based on 1 customer reviews
332,83
€
Wondering how to select a light source for luminaire? Below is a list of popular light sources of Osram and Philips with base information and the light source indication.
Fluorescent Linear and Circular
Base
Power
(W) Luminous flux
(lm) OSRAM PHILIPS Fluorescent Linear T5 (T16)
G5
8
400
Basic T5Short
L 8W
TL MiniStandard
TL Mini 8W 14
200... read more »