TALEXXdriver LC 25W 350-1050mA flexC SC EXC LED Drivers

Tridonic - parametry
	110
	CE
	EAC
	EL
	ENEC
	IP20
	RCM
	RoHs
	SELV
	Short Circuit Proof
	doppelte Isolierung
AC voltage range	198 – 264 V
Rated supply voltage	220 – 240 V
DC voltage range	176 – 280 V
Mains frequency	0 / 50 / 60 Hz
Overvoltage protection	320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load)(1)(2)	140 mA
Leakage current (at 230 V, 50 Hz, full load)(1)(2)	< 250 µA
Max. input power	29 W
Typ. efficiency (at 230 V, 50 Hz, full load)(2)	86 %
Typ. input current in no-load operation	17 mA
Typ. input power in no-load operation	0.6 W
In-rush current (peak / duration)	20 A / 200 µs
THD (at 230 V, 50 Hz, full load)(1)	< 10 %
Time to light (DC mode)	< 500 ms
Time to light (at 230 V, 50 Hz, full load)(1)	< 500 ms
Switchover time (AC/DC)	< 0.2 s
Turn off time (at 230 V, 50 Hz, full load)	< 50 ms
Max. output current peak (non-repetitive)	≤ output current + 35 %
Output current tolerance(1)	± 5 %
Max. output voltage (no-load voltage)	60 V
Output LF current ripple (< 120 Hz)	± 5 %
Dimming range(3)	15 – 100 %
Mains surge capability (between L - N)	1 kV
Mains surge capability (between L/N - PE)	2 kV
Burst / surge peaks output side against PE	< 500 V
Dimensions L x W x H	97 x 43 x 30 mm
λ (at 230 V, 50 Hz, full load)(1)	0.95
Typ. current (220 V, 0 Hz, full load, 50 % dimming level)(2)	70 mA

• Constant current LED Driver
• Dimmable via ready2mains™ Gateway
• Dimming range 15 to 100 % (dependig on load)
• Can be either used build-in or independent with clip-on strain-relief (see accessory)
• Adjustable output current between 350 and 1,050 mA via ready2mains™ Programmer or I-select 2 plugs
• Max. output power 25 W
• Up to 86 % efficiency
• Nominal life-time up to 100,000 h
• 5-year guarantee

Housing properties

• Casing: polycarbonate, white
• Type of protection IP20

Interfaces

• ready2mains™ (configuration and dimming via mains)
• Terminal blocks: 45° push terminals

Functions

• Adjustable output current in 1-mA-steps (ready2mains™, I-select 2)
• Dimmable via ready2mains™ interface
• Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
• Suitable for emergency escape lighting systems acc. to EN 50172

Benefits

• Application-oriented operating window for maximum compatibility
• Best energy savings due to high efficiency and dimming via ready2mains™
• Flexible configuration via ready2mains™ and I-select 2
• Reliability proven by life-time up to 100,000 h and 5-year guarantee

Typical applications

• For downlight, spotlight and decorative applications